Leveling your dishwasher is a crucial step in ensuring optimal performance and preventing leaks. Here’s a step-by-step guide to help you level your Samsung dishwasher properly:

Required Tools:

  • A level
  • A hex tool
  • A wrench

Leveling Process:

  1. Access the Legs: If the dishwasher is already installed, remove the kickplate to access the legs and rear adjustment screw.
  2. Horizontal Leveling: Use the level to check the dishwasher’s horizontal level. Adjust the front two legs as needed by rotating them counterclockwise to raise the dishwasher or clockwise to lower it.
  3. Vertical Leveling: Place the level against the front door of the dishwasher vertically. Locate the rear adjustment screw at the front of the base and use a hex tool to adjust it. Turning left raises the back of the dishwasher, while turning right lowers it.
  4. Check Door Clearance: Ensure that the top of the door does not contact screws, brackets, or the countertop. If it does, adjust the leveling legs on the bottom front of the dishwasher.
  5. Check Door Frame Alignment: While you’re leveling, check the sides of the door frame to ensure they are not bent inward or outward. Place the level vertically against the side of the door frame. If it’s not flat against the frame, adjust the cabinet screws to straighten the frame.
  6. Verify Frame Width: Measure the width of the door frame at the cabinet screws. It should be 22 inches to confirm that the frame is straight.

Properly leveling your Samsung dishwasher ensures smooth operation and prevents potential issues. Refer to your user manual for model-specific instructions and enjoy hassle-free dishwashing!